| Presenting Author | Poster ID | Poster Title | Session/Day |
|---|---|---|---|
| Ugo Bonavolontà | P1-001 | European DEMO Divertor Cassette: Study of an Alternative Path of the Cooling Pipes inside the Cassette Body Considering Piping Manufacturing Assessment | Poster session 1 (Monday) |
| Delphine Bossu | P1-002 | Manufacture of an ITER Full Scale First Wall Panel Prototype | Poster session 1 (Monday) |
| Zhang Chen | P1-003 | The Simulation of the Quasi-snowflake Divertor Configuration with the EAST New Upgrade Lower Tungsten Divertor Shape | Poster session 1 (Monday) |
| Mauro Dalla Palma | P1-004 | Design of the RFX-mod2 First Wall | Poster session 1 (Monday) |
| Pietro Alessandro Di Maio | P1-005 | On the Numerical Assessment of the Thermal-hydraulic Operating Map of the DEMO Divertor Plasma Facing Components Cooling Circuit | Poster session 1 (Monday) |
| Hai Xie | P1-006 | Plasma-facing Components Damage and its Effects on Plasma Performance in EAST Tokamak | Poster session 1 (Monday) |
| Stefan Elgeti | P1-007 | W Enrichment by Preferential Sputtering of EUROFER 97 as Actively Cooled Target | Poster session 1 (Monday) |
| Mehdi Firdaouss | P1-008 | Design and Manufacturing of Bulk Tungsten Tiles for WEST Outer Limiter | Poster session 1 (Monday) |
| Thomas Franke | P1-009 | The EU DEMO Equatorial Outboard Limiter – Design and Port Integration Concept | Poster session 1 (Monday) |
| Domenico Marzullo | P1-010 | Structural Analysis on EU-DEMO Divertor Cassette Attachments Subjected to Thermal and Electric-magnetic Loads | Poster session 1 (Monday) |
| Marc Missirlian | P1-011 | Development and High-heat-flux Test Results of a DEMO Divertor Target Concept with a Thick Graded Bond Interlayer | Poster session 1 (Monday) |
| Pierre Gavila | P1-012 | Status of the ITER Divertor IVT Procurement | Poster session 1 (Monday) |
| Laurent Guerrini | P1-013 | Fabrication of ITER Divertor Cassette Body Prototypes | Poster session 1 (Monday) |
| Juri Igitkhanov | P1-014 | The Runaway Electron Evolution in the DEMO Reactor Plasmas | Poster session 1 (Monday) |
| Daniel Iglesias | P1-015 | Divertor Design and Integration Activities for the High-field ST40 Spherical Tokamak | Poster session 1 (Monday) |
| Ryota Imazawa | P1-016 | Thermal and Structural Analyses of Retro-reflectors of ITER Poloidal Polarimeter that are Mounted on First Wall Panels | Poster session 1 (Monday) |
| Vito Imbriani | P1-017 | Insulated Fixation System of Plasma Facing Components to the Divertor Cassette in EuroFusion-DEMO | Poster session 1 (Monday) |
| Hideki Ito | P1-018 | Hydrogen Permeation Behavior Through Tungsten Deposition Layer | Poster session 1 (Monday) |
| Petra Jenus | P1-019 | W2C-Reinforced Tungsten: A Promising Candidate for High-Heat-Flux Material | Poster session 1 (Monday) |
| Minyou Ye | P1-020 | Simulation Study of Evolution of Plasma-related Defects in Tungsten | Poster session 1 (Monday) |
| Jihwan Lim | P1-021 | Experimental Study of Hypervapotron and Cylindrical Channel for Divertor Cooling by One-side, Electric Joule Heating System | Poster session 1 (Monday) |
| Felix Klein | P1-022 | Improved Safety for DEMO by Advanced Tungsten Alloys as First Wall Armor | Poster session 1 (Monday) |
| Igor Kupriyanov | P1-023 | Surface Damage of Beryllium Armor Materials under Extreme Plasma Heat Loads | Poster session 1 (Monday) |
| Sun Eui Lee | P1-024 | Tritium Distribution Analysis on Be Limiter Tiles from JET-ITER Like Wall Campaigns using Imaging Plate Technique and Beta-ray Induced X-ray Spectrometry | Poster session 1 (Monday) |
| Andrey Litnovsky | P1-025 | Smart Tungsten-based Alloys For a First Wall of DEMO | Poster session 1 (Monday) |
| Yves Martin | P1-026 | Substantial Upgrades of the TCV Tokamak for Improved Divertor and Heating Capabilities | Poster session 1 (Monday) |
| Domenico Marzullo | P1-027 | Preliminary Engineering Assessment of Alternative Magnetic Divertor Configurations for EU-DEMO | Poster session 1 (Monday) |
| Yuki Matsuda | P1-028 | In-situ Measurement of Surface Modifications of Tungsten Exposed to Pulsed High Heat Flux for Divertor Design in Tokamak-type Fusion Nuclear Reactors | Poster session 1 (Monday) |
| Giuseppe Mazzone | P1-029 | EuroFusion-DEMO Divertor – Cassette Design and Integration | Poster session 1 (Monday) |
| Triestino Minniti | P1-030 | Neutron Tomography of “Thermal Break” Divertor Mock-ups before and after High Heat Flux Exposure | Poster session 1 (Monday) |
| Alessandro Moro | P1-031 | Design of Electron Cyclotron Resonance Heating Potection Components for First Plasma Operations in ITER | Poster session 1 (Monday) |
| Rudolf Neu | P1-032 | Behaviour of Actively Cooled ITER Divertor Mock-ups in High Power ASDEX Upgrade Discharges | Poster session 1 (Monday) |
| Heiko Neuberger | P1-033 | Manufacturing of a HCPB First Wall Demonstrator using the Additive Manufacturing Process of Metal Powder Application | Poster session 1 (Monday) |
| Simone Noce | P1-034 | Nuclear Analyses for the Design of the Plasma Facing Components of the DEMO Divertor | Poster session 1 (Monday) |
| Takeru Ohgo | P1-035 | Plasma Irradiation Experiment on the Metal Pebble Flow in the TPD Sheet-U | Poster session 1 (Monday) |
| Eo Hwak Lee | P1-036 | Study on Feasibility of Steady-state Assumption for HCCR-TBM under Transient Thermal Load | Poster session 1 (Monday) |
| Vincenzo Pericoli Ridolfini | P1-037 | Survey of the Behaviour of Liquid Metals Targets, Sn and Li, in Reactor Relevant Conditions. DEMO and I-DTT | Poster session 1 (Monday) |
| Sergey Pestchanyi | P1-038 | TOKES Simulations of Mitigated Disruption Thermal Quenches in ITER | Poster session 1 (Monday) |
| Jan Prokůpek | P1-039 | Progress in Commissioning of the HELCZA High Heat Flux Test Facility for ITER First Wall Panel Tests | Poster session 1 (Monday) |
| Maria Lorena Richiusa | P1-040 | DEMO Single Module Segment Concept First Wall and Limiter Misalignment Study by 3D Field Line Tracing | Poster session 1 (Monday) |
| Selanna Roccella | P1-041 | Ultrasonic Test Results Comparison before and after High Heat Flux Testing on W-monoblock Mock-ups Vertical Target for EU-DEMO | Poster session 1 (Monday) |
| Yuzhong Zhang | P1-042 | Research on the Normal Spectral Band Emissivity Characteristic within 7.5 to 13 mu for Graphite between 100 and 500 °C | Poster session 1 (Monday) |
| P1-043 | withdrawn | Poster session 1 (Monday) | |
| Maxim Sviridenko | P1-044 | Analysis of Enhanced Heat Flux First Wall behavior under ITER Pulsed Loads | Poster session 1 (Monday) |
| Toshikio Takimoto | P1-045 | Deuterium Retention in the Tungsten Irradiated Detached Plasma | Poster session 1 (Monday) |
| Charly Talatizi | P1-046 | Inverse Radiation Problem with Infrared Images to Monitor Plasma-Facing Components Temperature in Metallic Fusion Devices | Poster session 1 (Monday) |
| Sergey Tomilov | P1-047 | Implementation of the FSP Pipe Option Design into Non-standard FW Panel | Poster session 1 (Monday) |
| Matthieu Toussaint | P1-048 | Beam Duct for the 1 MW Neutral Beam Injector on TCV | Poster session 1 (Monday) |
| Andrey Ushakov | P1-049 | ITER VSRS First Mirror Plasma Cleaning in RF Gas Discharge – Circuit Design and Plasma Effects | Poster session 1 (Monday) |
| Ladislav Vála | P1-050 | High Heat Flux Tests of Divertor Mock-ups at the HELCZA Facility for the EUROFusion DIVERTOR Project | Poster session 1 (Monday) |
| Eugenio Vallone | P1-051 | On the Thermal-hydraulic Performances of the DEMO Divertor Cassette Body Cooling Circuit Equipped with a Liner | Poster session 1 (Monday) |
| Alexey Vertkov | P1-052 | An Alternative Design Concept of DEMO Relevant Liquid Lithium Divertor Target Based on Capillary Structures | Poster session 1 (Monday) |
| Zhongwei Wang | P1-053 | Thermal and Mechanical Analyses of W7-X Plasma Facing Components for Operation Phase 2 | Poster session 1 (Monday) |
| Pinghuai Wang | P1-054 | Microstructure Characterization of the Key Material Interfaces in ITER First Wall Components | Poster session 1 (Monday) |
| Tian Xie | P1-055 | 3D Modelling of the Toroidally-localized Lithium Powder Injection Experiments on EAST with EMC3-EIRENE | Poster session 1 (Monday) |
| Juancheng Yang | P1-056 | Magnetohydrodynamic Effect of Multilayer Liquid Metal Film Flow on the Inclined Surface | Poster session 1 (Monday) |
| Kuo Zhang | P1-057 | Fracture Mechanical Analysis of Tungsten/Tungsten-copper-Composite Plasma-facing Component for High-heat-flux Divertor Target | Poster session 1 (Monday) |
| Jizhong Sun | P1-058 | Molecular Dynamics Simulation Study of the Interaction between Energetic Incident D-species with Rough Tungsten Surface | Poster session 1 (Monday) |
| Shuhei Nogami | P1-059 | Laminated Composites using Potassium Doped Tungsten | Poster session 1 (Monday) |
| Erika Akahoshi | P1-060 | Corrosion Behavior of Multi-layer Ceramic Coatings in Liquid Lithium-lead | Poster session 1 (Monday) |
| Julien Aubert | P1-061 | Design and Preliminary Analyses of the New Water Cooled Lithium Lead TBM for ITER | Poster session 1 (Monday) |
| Serena Bassini | P1-062 | Long-term Corrosion Behavior of EUROFER RAMF Steel in Static Liquid Pb-16Li at 550°C | Poster session 1 (Monday) |
| Gaetano Bongiovi | P1-063 | Advancements in the HELIAS 5-B Breeding Blanket Structural Analysis | Poster session 1 (Monday) |
| Rémi Boullon | P1-064 | Development of a WCLL DEMO First Wall Design Module in the SYCOMORE System Code Interfaced with the Neutronic One | Poster session 1 (Monday) |
| Hans-Jörg Brinkmann | P1-065 | Experimental Investigation of Liquid Metal MHD Flow Entering a Flow Channel Insert | Poster session 1 (Monday) |
| Luigi Candido | P1-066 | An Integrated Hydrogen Isotopes Transport Model for the TRIEX-II Facility | Poster session 1 (Monday) |
| Ilenia Catanzaro | P1-067 | Parametric Study of the Influence of Double-walled Tubes Layout on the DEMO WCLL Breeding Blanket Thermal Performances | Poster session 1 (Monday) |
| Vladimir Chakin | P1-068 | Damage of Titanium Beryllide under High-dose Neutron Irradiation | Poster session 1 (Monday) |
| Long Chen | P1-069 | Simulations Toward the Ultimate Parameter of Liquid Metal Fusion Blanket, Part I: High Hartmann Number MHD Flow | Poster session 1 (Monday) |
| Takumi Chikada | P1-070 | Compatibility of Tritium Permeation Barrier Coatings with Ceramic Breeder Pebbles | Poster session 1 (Monday) |
| Pierluigi Chiovaro | P1-071 | Investigation of the DEMO WCLL Breeding Blanket Cooling Water Activation | Poster session 1 (Monday) |
| Ion Cristescu | P1-072 | Developments on the Tritium Extraction and Recovery System for HCPB | Poster session 1 (Monday) |
| Zhi Chen | P1-073 | Control System Design for the Primary Loop of CFETR WCCB | Poster session 1 (Monday) |
| Gheorghe Pasca | P1-074 | Design Features of the RMSB for Tritium Recovery as Tritiated Water from Helium Purge Loop of the TER HCPB | Poster session 1 (Monday) |
| Francesco Edemetti | P1-075 | On the Impact of the Heat Transfer Modelling Approach on the Prediction of DEMO WCLL Breeding Blanket Thermal Performances | Poster session 1 (Monday) |
| Riho Endoh | P1-076 | Deuterium Permeation Behavior through Yttria-stabilized Zirconia Coating Fabricated by Magnetron Sputtering | Poster session 1 (Monday) |
| Iván Fernández-Berceruelo | P1-077 | Remarks on the Performance of the EU DCLL Breeding Blanket Adapted to DEMO 2017 | Poster session 1 (Monday) |
| Ruggero Forte | P1-078 | Preliminary Design of the Cap Regions of DEMO Water-Cooled Lithium Lead Breeding Blanket Segments | Poster session 1 (Monday) |
| Ramil Gaisin | P1-079 | Industrial-scale Manufacturing Experience of Titanium Beryllide Block for DEMO Blanket Application | Poster session 1 (Monday) |
| Maria Gonzalez | P1-080 | Electric Resistivity Behavior of Alumina Flow Channel Inserts in PbLi | Poster session 1 (Monday) |
| Wenhai Guan | P1-081 | Evaluation on Electromagnetic Analysis of Cylindrical WCCB TBM | Poster session 1 (Monday) |
| Jiajia Han | P1-082 | Influence of Heat Transfer on Tritium Transport in Liquid Metal Blankets at High Hartmann Number | Poster session 1 (Monday) |
| Francisco Hernández-González | P1-083 | Consolidated Design of the HCPB Breeding Blanket for the pre-Conceptual Design Activities of the EU DEMO and Harmonization with the ITER HCPB TBM Program | Poster session 1 (Monday) |
| Julia M. Heuser | P1-084 | Survey on Lithium 6 Availability and Enrichment Strategies | Poster session 1 (Monday) |
| Karel Samec | P1-085 | Preparation of Irradiation Rig for Test of Al2O3 Coatings in Contact with Liquid PbLi | Poster session 1 (Monday) |
| Sawoong Kim | P1-086 | Effect of Post Weld Heat Treatment on Mechanical Properties of Gas Tungsten Arc Welded 316L(N)-IG (X2CrNiMo 17-12-2) Stainless Steel | Poster session 1 (Monday) |
| Viktor Klüber | P1-087 | Numerical Simulation of 3D Magnetohydrodynamic Liquid Metal Flow in a Spatially Varying Solenoidal Magnetic Field | Poster session 1 (Monday) |
| Satoshi Konishi | P1-088 | Experimental Validation of Tritium Recovery System from Liquid LiPb by Vacuum Sieve Tray Concept | Poster session 1 (Monday) |
| Michal Kordač | P1-089 | Modeling of PbLi Purification from Volatile Contaminants | Poster session 1 (Monday) |
| Wolfgang Krauss | P1-090 | Qualification of Al-based Coatings Processed by ECX-Process for Application as Corrosion and T-Permeation Barriers | Poster session 1 (Monday) |
| Eo Hwak Lee | P1-091 | Performance Test of the Key Components for the HCCR Breeding Blanket Cooling System and the Validation of the GAMMA-FR code | Poster session 1 (Monday) |
| Youngmin Lee | P1-092 | Numerical Investigation of Purge Gas Flow through Binary-Sized Pebble Beds using Discrete Element Method and Computational Fluid Dynamics | Poster session 1 (Monday) |
| Oliver Leys | P1-093 | Induced Jet Break-Up Fabrication of Advanced Ceramic Breeder Pebbles | Poster session 1 (Monday) |
| Rosa Lo Frano | P1-094 | Li4SiO4 Pebbles New Fabrication Process: Feasibility and Preliminary Experimental Data | Poster session 1 (Monday) |
| Yudong Lu | P1-095 | Benchmark of Serpent-2 with MCNP: Application to EU Fusion DEMO HCPB Breeding Blanket | Poster session 1 (Monday) |
| Ivan Alessio Maione | P1-096 | Update of Electromagnetic Loads on HCPB Breeding Blanket for DEMO 2017 Configuration | Poster session 1 (Monday) |
| Leo Bühler | P1-097 | Three Dimensional Magneto Convective Flows in Geometries Relevant for DCLL Blankets | Poster session 1 (Monday) |
| Yuya Miyoshi | P1-098 | Effect of Dragged Magnetic Field Lines into RAFM Steel Blanket Modules on First Wall Heat Load | Poster session 1 (Monday) |
| Kenji Morita | P1-099 | Computational Search for Superionic Conductors for Efficient Lithium Isotope Separation with the Electrodialysis Technique | Poster session 1 (Monday) |
| Fabio Moro | P1-100 | Nuclear Analysis of the Water Cooled Lithium Lead DEMO Reactor | Poster session 1 (Monday) |
| Ivo Moscato | P1-101 | Assessment of the Dose Rates due to Water Activation on an Isolation Valve of the DEMO WCLL Breeding Blanket Primary Heat Transfer System | Poster session 1 (Monday) |
| Keisuke Mukai | P1-102 | Neutronics Experiment with a Blanket Mock-up using a DD Fusion Neutron Source | Poster session 1 (Monday) |
| CHANGED | P1-103 | Moved to Poster session 3 (P3-135) | |
| Yasuyuki Ogino | P1-104 | Measurement of Neutron fluence with Removal of X-/γ-ray Effect from Neutron Imaging Plate | Poster session 1 (Monday) |
| Keiji Oishi | P1-105 | Compatibility between Fusion Reactor Blanket Structure Material F82H and Solid Breeder Lithium Oxide | Poster session 1 (Monday) |
| Tomohiro Okada | P1-106 | Fundamental Analysis for Electrochemical Extraction and Monitoring of Coexisting Impurities in Lead Lithium using Chloride Molten Salt | Poster session 1 (Monday) |
| Fumito Okino | P1-107 | Emissivity Measurement of PbLi Droplet in a Vacuum for the Heat Recovery by Radiation | Poster session 1 (Monday) |
| Yasuhisa Oya | P1-108 | Hydrogen Isotope Exchange at the surface of C-W mixed Material Layer on Tungsten by Gas Exposure | Poster session 1 (Monday) |
| Byungil Park | P1-109 | Construction of the Hot Helium Leak Test Facility for the ITER Blanket Shield Block | Poster session 1 (Monday) |
| Pavel Pereslavtsev | P1-110 | Analyses of the Shielding Options for HCPB DEMO Blanket | Poster session 1 (Monday) |
| Ivan Poddubnyi | P1-111 | Strength Analysis and Impact Test of Stub Key Pads of ITER Blanket | Poster session 1 (Monday) |
| Shinichi Satake | P1-112 | Turbulent Heat Transfer for Coolant Water Flow in Plasma Facing Component | Poster session 1 (Monday) |
| Satoshi Sato | P1-113 | Overview of Test Modules for Advanced Fusion Neutron Source A-FNS | Poster session 1 (Monday) |
| Chang Wook Shin | P1-114 | Design and Experimental Study of Adsorption Bed for the Helium Coolant Purification System | Poster session 1 (Monday) |
| Hiroki Shishido | P1-115 | Experimental Evaluation of the Dynamic Viscosity of Molten Salt Flinabe and Validation of the Polarizable Ion Model | Poster session 1 (Monday) |
| Simone Siriano | P1-116 | MHD Forced Convection Flow in Dielectric and Electro-conductive Rectangular Annuli | Poster session 1 (Monday) |
| Simone Siriano | P1-117 | Electromagnetic Coupling Phenomena in Co-axial Rectangular Channels | Poster session 1 (Monday) |
| Gandolfo Alessandro Spagnuolo | P1-118 | Development of Load Specifications for the Design of the Breeding Blanket System | Poster session 1 (Monday) |
| Dionisio Di Giulio | P1-119 | Analysis of Flow Channel Insert Deformations Influence on the Liquid Metal Flow in DCLL Blanket Channels | Poster session 1 (Monday) |
| Gergő I. Pokol | P1-120 | Development of Secondary Charged Particle Activation based Method for Tritium Production Rate Measurement in Fusion Blankets | Poster session 1 (Monday) |
| Teruya Tanaka | P1-121 | Applicability Study of Blanket Systems with Liquid Tritium Breeder/Coolant and Liquid Neutron Multiplier in Helical Reactor FFHR Designs | Poster session 1 (Monday) |
| Alessandro Tassone | P1-122 | MHD Pressure Drop Estimate for the WCLL In-vessel PbLi Loop | Poster session 1 (Monday) |
| Raffaella Testoni | P1-123 | Magnetohydrodynamics Effect on Tritium Transport at Breeder Unit Level for the WCLL Breeding Blanket of DEMO | Poster session 1 (Monday) |
| Minh Quang Tran | P1-124 | Megawatt Power Generation of the Dual-frequency Gyrotron for TCV at 84 and 126 GHz, in Long Pulses | Poster session 1 (Monday) |
| Alessandro Venturini | P1-125 | Experimental Qualification of New Instrumentation for Lead-Lithium Eutectic in IELLLO Facility | Poster session 1 (Monday) |
| Wanjing Wang | P1-126 | Progress of WCCB Manufacture Technology at ASIPP | Poster session 1 (Monday) |
| He Wang | P1-127 | Study of Hydrodynamics and Thermal Transfer in Duct with 180° Sharp Bend in Lead-Lithium Liquid Metal Blankets | Poster session 1 (Monday) |
| Gaku Yamazaki | P1-128 | Electrochemical Measurements of Blanket Structural Materials’ Corrosion in HF-containing Molten FLiNaK Salt | Poster session 1 (Monday) |
| Jae Sung Yoon | P1-129 | Fabrication of Small Mock-up and Performance Verification Tests to Verify E-beam Applicability to HCCR Blanket | Poster session 1 (Monday) |
| Arturs Zarins | P1-130 | Radiation-induced Defects and Radiolysis Products in 5 MeV Electron-irradiated Lithium Orthosilicate Pebbles with Various Contents of Lithium Metatitanate | Poster session 1 (Monday) |
| Guangming Zhou | P1-131 | Thermal Hydraulics Activities for the Consolidated HCPB Breeding Blanket of EU DEMO | Poster session 1 (Monday) |
| Ali Al Dabbas | P2-001 | Role of Silicate Sorption by Ankerite in Silicic Acid Species Solution | Poster session 2 (Tuesday) |
| Nicolae Bidica | P2-002 | Pre-Experiment Analysis for Permeation of Multi-component Hydrogen Isotopes through Metals in Non-steady-state | Poster session 2 (Tuesday) |
| Chao Chen | P2-003 | Mass Transfer Performance Test of Structured Packings for Tritiated Water Distillation Detritiation | Poster session 2 (Tuesday) |
| Salvatore D’Amico | P2-004 | Preliminary Thermal-hydraulic Analysis of the EU-DEMO Helium-Cooled Pebble Bed Fusion Reactor by using the RELAP5-3D System Code | Poster session 2 (Tuesday) |
| Tamás Dézsi | P2-005 | Generation and Transport of Activated Corrosion Products and 7Be in the Lithium Loop of IFMIF-DONES | Poster session 2 (Tuesday) |
| MariaTeresa Porfiri | P2-006 | Exploratory Fire Analysis in DONES Lithium System | Poster session 2 (Tuesday) |
| Matteo D’Onorio | P2-007 | Sensitivity Analysis for the Hydrogen Production During an Ex-Vessel LOCA without Plasma Shutdown for the EU DEMO WCLL Blanket Concept | Poster session 2 (Tuesday) |
| Matteo D’Onorio | P2-008 | Preliminary Safety Analysis of an in-vessel LOCA for the EU DEMO WCLL Blanket Concept. | Poster session 2 (Tuesday) |
| Laura Estévez Núñez | P2-009 | Atmospheric Activation in the IFMIF-DONES Accelerator Systems | Poster session 2 (Tuesday) |
| Antonio Froio | P2-010 | Numerical Quantification of the Beneficial Effects of Primary Heat Transfer System Isolation Valves in Case of In-Vessel Loss-Of-Coolant Accidents for the EU DEMO | Poster session 2 (Tuesday) |
| Stankunas Gediminas | P2-011 | Shut-down Dose Rate Analysis for the Activated Target Assembly in IFMIF-DONES During Maintenance | Poster session 2 (Tuesday) |
| Youngseok Lee | P2-012 | Diamond Fast-Neutron Detector Applied to the KSTAR Tokamak | Poster session 2 (Tuesday) |
| Rosa Lo Frano | P2-013 | Numerical Analysis of Steam Condensation at Sub-atmospheric Pressure in Water Suppression Tank | Poster session 2 (Tuesday) |
| Giovanni Mariano | P2-014 | Progress in Development of Advanced D1S Dynamic for Three-dimensional Shutdown Dose Rate Calculations | Poster session 2 (Tuesday) |
| Dobromir Panayotov | P2-015 | Use of Phenomena Identification and Ranking Tables Technique in the Fusion Safety Assessment | Poster session 2 (Tuesday) |
| Alessio Pesetti | P2-016 | Experimental and Numerical Analysis of Sub-Atmospheric Steam Condensation in Suppression Tank with SIMMER IV Code | Poster session 2 (Tuesday) |
| Maria Teresa Porfiri | P2-017 | Safety Assessment for European DEMO – Achievements and Open Issues in View of a Generic Site Safety Report | Poster session 2 (Tuesday) |
| Yuefeng Qiu | P2-018 | Shutdown Dose Rate Calculations for the IFMIF-DONES Lithium Loop Cell Using Variance Reduction Techniques | Poster session 2 (Tuesday) |
| Rosaria Villari | P2-019 | Ionizing Radiation Monitoring Requirements at the Divertor Tokamak Test Facility | Poster session 2 (Tuesday) |
| Toshiharu Takeishi | P2-020 | Consideration of the Low Contamination Device for the Measurement of Tritium Release Rate | Poster session 2 (Tuesday) |
| Andrius Tidikas | P2-021 | Activation Analysis of the European DEMO Divertor with Respect to the Different Breeding Blanket Segmentation | Poster session 2 (Tuesday) |
| Dianle Wang | P2-022 | The Flow Instability Phenomenon in Loss of Coolant Accident of Water Cooling Blanket | Poster session 2 (Tuesday) |
| Jingyu Zhang | P2-023 | Influence of Different Equivalent Methods of Pulsed Neutron Irradiation on ACPs Source Term Calculation in Fusion Reactor | Poster session 2 (Tuesday) |
| He Zhang | P2-024 | Consideration on Defence-in-depth Applied in CFETR | Poster session 2 (Tuesday) |
| Gábor Anda | P2-025 | Development of Li, Na, K, Rb and Cs Thermionic Ion Sources Using SiC Block Heater Technology | Poster session 2 (Tuesday) |
| Piero Agostinetti | P2-026 | RAMI Evaluation of the Beam Source for the DEMO Neutral Beam Injectors | Poster session 2 (Tuesday) |
| Maurizio Angelone | P2-027 | Measurement of Delayed Neutron Emission from Water Activated by 14 MeV Neutrons in a FW Mock-up of ITER | Poster session 2 (Tuesday) |
| Frederik Arbeiter | P2-028 | Taking to Service and First Results of the Q-PETE/D2 Hydrogen Permeation Setup | Poster session 2 (Tuesday) |
| Örs Asztalos | P2-029 | Application of BES Synthetic Diagnostics for the Study of SOL Filament Dynamics on the EAST Tokamak | Poster session 2 (Tuesday) |
| Maria-Victoria Bologa | P2-030 | Parameter Study and Dynamic Simulation of Current DEMOnstration Intermediate Heat Transfer and Storage System Design via MATLAB/Simulink | Poster session 2 (Tuesday) |
| Federica Bonomo | P2-031 | On the Vertical Uniformity of an ITER-like Large Beam | Poster session 2 (Tuesday) |
| Barbara Caiffi | P2-032 | Nuclear Analyses in Support of the Conceptual Design of the DTT Tokamak Neutron Diagnostics | Poster session 2 (Tuesday) |
| Jesus Castellanos | P2-033 | Design, Manufacturing and Test of the LIPAc High Energy Beam Transport Line | Poster session 2 (Tuesday) |
| Hyun-Kyung Chung | P2-034 | Virtual DEMO for Korean Fusion Program | Poster session 2 (Tuesday) |
| Valter Cocilovo | P2-035 | Analysis of Stress Induced by Plasma Disruption on Vacuum Vessel through Multi-physics Modeling | Poster session 2 (Tuesday) |
| Donghong Liu | P2-036 | 3D SURO Modelling of Beryllium Erosion and Deposition on Tungsten Rough Surfaces under ITER-relevant Plasma Conditions | Poster session 2 (Tuesday) |
| Niek den Harder | P2-037 | Beam Formation and Transport in the BATMAN Upgrade Test Facility | Poster session 2 (Tuesday) |
| Marica Eboli | P2-038 | Test Series D Experimental Results for SIMMER Code Validation of WCLL BB In-box LOCA in LIFUS5/Mod3 facility | Poster session 2 (Tuesday) |
| Thomas Emmerich | P2-039 | Thermal Fatigue Tests on Functionally Graded W/EUROFER Layer Systems in a Newly Constructed Testing Apparatus | Poster session 2 (Tuesday) |
| Thomas Emmerich | P2-040 | Development Progress of Functionally Graded W/EUROFER Layers for First Wall Components | Poster session 2 (Tuesday) |
| Davide Flammini | P2-041 | Pre-Analysis of the WCLL-mock up Neutronics Experiment at the Frascati Neutron Generator | Poster session 2 (Tuesday) |
| Nicola Fonnesu | P2-042 | Shutdown Dose Rate Studies for the TT and DTE2 Campaigns at JET | Poster session 2 (Tuesday) |
| Haiying Fu | P2-043 | Development of Small Specimen Test Technologies on Joints of Fusion Structural Materials in SWIP | Poster session 2 (Tuesday) |
| Francesco Galleni | P2-044 | RELAP5-SIMMER-III Code Coupling Development of PbLi-Water Interaction | Poster session 2 (Tuesday) |
| Belit Garcinuño | P2-045 | Development of an On-line Sensor for Hydrogen Isotopes Monitoring in Flowing Lithium at DONES | Poster session 2 (Tuesday) |
| Bruno Gonfiotti | P2-046 | Application of the Best-Estimate Model Calibration and Prediction through Experimental Data Assimilation Methodology to the Tests Performed on a Helium Cooled First Wall Mock-Up | Poster session 2 (Tuesday) |
| Christian Hopf | P2-047 | Residual Ion Energy Recovery for the DEMO NBI – a Conceptual Design Study | Poster session 2 (Tuesday) |
| Andrew Hurlbatt | P2-048 | Improved Characterisation of ITER-Relevant Large Negative Ion Beams through Forward Modelling of their Diagnostics | Poster session 2 (Tuesday) |
| Samad Khani Moghanaki | P2-049 | The SIMMER-III code validation: Post-test Analysis of Test D1.1 on the LIFUS5/Mod3 facility for In-box LOCA of WCLL-BB | Poster session 2 (Tuesday) |
| Ivan Kodeli | P2-050 | Validation of Source Term Descriptions in MCNP and MCUNED Code Models for SINBAD Fusion Benchmark Compilations | Poster session 2 (Tuesday) |
| Boštjan Končar | P2-051 | Analysis of Thermal Response of New Diagnostic Probe in TCV | Poster session 2 (Tuesday) |
| Davide Laghi | P2-052 | Understanding and Investigating the Relationships between Geometrical Errors and Lost Particles in MCNP | Poster session 2 (Tuesday) |
| Naoko Ashikawa | P2-053 | Tritium Decontamination Scenario from Plasma Facing Materials under Vacuum Condition in DEMO | Poster session 2 (Tuesday) |
| Kihyun Lee | P2-054 | First Neutral Beam Injection Experiments in Versatile Experimental Spherical Torus | Poster session 2 (Tuesday) |
| Yi-Kang Lee | P2-055 | Tripoli-4 Simulation of the FNG Copper Benchmark Experiment and the Tritium Production in the Lithium Diamond Detector for ITER-TBM | Poster session 2 (Tuesday) |
| Igor Lengar | P2-056 | Transport Calculations with the JET Torus MCNP Models for Characterization of the Neutron field | Poster session 2 (Tuesday) |
| Donghong Liu | P2-057 | First Simulation of Edge Impurity Transport and Divertor Fluxes on HL-2M with EMC3-EIRENE | Poster session 2 (Tuesday) |
| Donghong Liu | P2-058 | SURO-FUZZ Modeling of Hydrogen Reflection on Tungsten Nano-structure Surface | Poster session 2 (Tuesday) |
| Donghong Liu | P2-059 | EMC3-EIRENE Modelling of Impacts of the Injected Neon Amount on Heat Flux Deposition on EAST | Poster session 2 (Tuesday) |
| Victor Lopez Ochoa | P2-060 | Photon Tally Convergence Acceleration in D1S Calculation | Poster session 2 (Tuesday) |
| Mauro Recchia | P2-061 | Voltage Hold Off Test of the Insulating Supports for the Plasma Grid Mask of SPIDER | Poster session 2 (Tuesday) |
| Daniele Martelli | P2-062 | LIFUS II Corrosion Loop Final Design and Screening of an Al- based Diffusion Coating in Stagnant PbLi Environment | Poster session 2 (Tuesday) |
| Domonkos Nagy | P2-063 | Engineering Design of Wendelstein 7-X alkali Metal Beam Diagnostic Observation System | Poster session 2 (Tuesday) |
| Chantal Nobs | P2-064 | Computational Evaluation of N-16 and N-17 Measurements for a 14 MeV Neutron Irradiation of an ITER First Wall Component with Water Circuit | Poster session 2 (Tuesday) |
| Oriol Nomen | P2-065 | Preliminary Design of the HEBT of IFMIF DONES | Poster session 2 (Tuesday) |
| Sixten Norrman | P2-066 | Dynamic Modelling of the Helium-cooled DEMO Fusion Power Plant with an Intermediate Loop and Energy Storage System (Indirect Cycle) | Poster session 2 (Tuesday) |
| Sandro Paci | P2-067 | Analysis of the Ingress of Coolant Event Tests Performed in the Upgraded ICE Facility Aimed at the ECART Code Validation | Poster session 2 (Tuesday) |
| Lee Packer | P2-068 | Backwards Extrapolation Activation Diagnostics and their Dynamic Range for Pulsed Neutron Source Measurements | Poster session 2 (Tuesday) |
| Miklós Palánkai | P2-069 | Spiralock Locking Function Tests for the ITER Diagnostics In-Vessel Aplications | Poster session 2 (Tuesday) |
| Raul Pampin | P2-070 | Estimation of Radiation Conditions in the ITER Electron Cyclotron Upper Launcher with State-of-the-Art Simulation Techniques | Poster session 2 (Tuesday) |
| Mauro Pavei | P2-071 | SPIDER Plasma Grid Masking for Reducing Gas Conductance and Pressure in the Vacuum Vessel | Poster session 2 (Tuesday) |
| Attila Piros | P2-072 | Error Handling Method for Digital Twin Based Plasma Radiation Detection | Poster session 2 (Tuesday) |
| Marco Riva | P2-073 | FPGA Implementation of Diamond Detector Data Acquisition System for the ITER Radial Neutron Camera using FlexRIO PCIexpress Technology: Architecture and First Results | Poster session 2 (Tuesday) |
| Daniel Sánchez Herranz | P2-074 | Design and Configurations for the Shielding of the Beam Dump of IFMIF DONES | Poster session 2 (Tuesday) |
| Takuya Saze | P2-075 | Evaluation of the Neutron and Gamma-ray Doses in the LHD Torus Hall and the Basement on the Deuterium Plasma Operation and the Neutral Beam Conditioning | Poster session 2 (Tuesday) |
| Paloma Matia-Hernando | P2-076 | Measurements of the Angle-dependent Reflectivity of Plasma-Facing Components and Assessment of the Impact on the Estimations of Coverage of the IVVS Measurements of the ITER VV. | Poster session 2 (Tuesday) |
| Žiga Štancar | P2-077 | Neutron Detector Response Sensitivity Study for Realistic Plasma Neutron Sources at the JET tokamak | Poster session 2 (Tuesday) |
| Sixten Norrman | P2-078 | Dynamic Modelling of the Helium-cooled DEMO Fusion Power Plant with an Auxiliary Boiler | Poster session 2 (Tuesday) |
| Donghong Liu | P2-079 | SURO-FUZZ Modelling of Tungsten Fuzz Evolution in an Erosive Helium Plasma | Poster session 2 (Tuesday) |
| Weibin Xi | P2-080 | Magnet AC Loss and Stability Analysis of EAST in ELM Mode | Poster session 2 (Tuesday) |
| Hai Xie | P2-081 | Numerical Analyses of Impurity Behaviors For CFETR Scenarios of 1GW Fusion Power by the Integrated COREDIV Code | Poster session 2 (Tuesday) |
| Eiichi Yatsuka | P2-082 | Gamma-ray Irradiation Effects on Optical Coatings and Polarizers for Edge Thomson Scattering System in ITER | Poster session 2 (Tuesday) |
| Sixten Norrman | P2-083 | Dynamic Modelling of a Solid Energy Storage Concept for Pulsed Operation DEMO Fusion Power Plant (Direct Cycle) | Poster session 2 (Tuesday) |
| Hailin Zhao | P2-084 | The Electron Temperature Fluctuation on EAST Tokamak | Poster session 2 (Tuesday) |
| Meng Zhao | P2-085 | CFD Evaluation and Optimization of the HEMJ Divertor Cooling Design | Poster session 2 (Tuesday) |
| Jinho Bae | P2-086 | Fabrication of ITER LCTS Assembly Tools and Load Test for Lift Adapter | Poster session 2 (Tuesday) |
| P2-087 | withdrawn | Poster session 2 (Tuesday) | |
| Zheng Gong | P2-088 | Preliminary Study and Selection of CFETR In-Vessel Component Tritium Dust Decontamination Method in Hot Cell | Poster session 2 (Tuesday) |
| Stanislao Grazioso | P2-089 | The DTT Device: Preliminary Remote Maintenance Strategy | Poster session 2 (Tuesday) |
| Min-Su Ha | P2-090 | Fabrication and Load Test of ITER PF5 & 6 Coil Assembly Tools | Poster session 2 (Tuesday) |
| Emil Jonasson | P2-091 | Improved Reconstruction and Anomaly Detection in JET using LIDAR-Vision Fusion | Poster session 2 (Tuesday) |
| Keelan Keogh | P2-092 | Remote Handling Strategy and Prototype Tooling of the ITER Vacuum Vessel Pressure Suppression System Bleed Line Valve Assembly and Rupture Disk Assembly | Poster session 2 (Tuesday) |
| Kyoungo Nam | P2-093 | Fabrication and Factory Acceptance Test of ITER UPSE Installation Tool | Poster session 2 (Tuesday) |
| Yuto Noguchi | P2-094 | Development of Remote Bolt Tightening Tool for ITER First Wall Central Bolt | Poster session 2 (Tuesday) |
| Luigi Pangione | P2-095 | A Taxonomic Approach to Failure Mode Analysis for Use in Predictive Condition Monitoring | Poster session 2 (Tuesday) |
| Makiko Saito | P2-096 | Study of Decontamination and Maintenance for ITER Blanket Remote Handling System | Poster session 2 (Tuesday) |
| Robert Skilton | P2-097 | Visual Anomaly Detection in Tokamak Components using Generative Adversarial Networks | Poster session 2 (Tuesday) |
| Yingsong Zhao | P2-098 | A New Array Eddy Current Probe for Inspection of Small-diameter Tubes in Tokamak Fusion Nuclear Devices | Poster session 2 (Tuesday) |
| Huapeng Wu | P2-099 | Progress of Design and Analysis of Divertor Remote Maintenance System for CFETR | Poster session 2 (Tuesday) |
| Maryna Chernyshova | P2-100 | Functioning of GEM Based Detector for Poloidal Tomography Under Plasma Radiation Requirements | Poster session 2 (Tuesday) |
| Dániel Dunai | P2-101 | Utilizing Silicon Photomultiplier Detectors for Low Light Level High Frequency Measurements in Fusion Diagnostics | Poster session 2 (Tuesday) |
| Slavomir Entler | P2-102 | Temperature Dependence of the Hall Coefficient of Sensing Layer Materials Considered for DEMO Hall Sensors | Poster session 2 (Tuesday) |
| Saul Garavaglia | P2-103 | EU DEMO EC Equatorial Launcher Pre-conceptual Performance Studies | Poster session 2 (Tuesday) |
| Samo Gerksic | P2-104 | Stabilization of Resistive Wall Modes for ITER using Model Predictive Control | Poster session 2 (Tuesday) |
| Keito Hanai | P2-105 | Design of High Current Cesium-free Negative Ion Source by Sheet Plasma | Poster session 2 (Tuesday) |
| Masao Ishikawa | P2-106 | Detail Design of In-Vessel Components of ITER Neutron Flux Monitor Equipped with Microfission Chambers | Poster session 2 (Tuesday) |
| Irena Ivanova-Stanik | P2-107 | Analysis of the Influence of the Different Impurity Seeding on the Burn-up Fraction and Plasma Confinement in the EU DEMO reactor | Poster session 2 (Tuesday) |
| Karel Kovařík | P2-108 | Analysis of Transmutation of Candidate Sensitive Layer Materials of Hall Detectors under DEMO Like Neutron Fluxes | Poster session 2 (Tuesday) |
| Ewa Laszynska | P2-109 | Deconvolution of Neutron Spectrum for the DT Neutron Generator Based on a Combination of Activation Method, Unfolding Processes and Numerical Simulations | Poster session 2 (Tuesday) |
| Paul McNeely | P2-110 | Commissioning and Initial Operation of the W7-X Neutral Beam Injection Heating System | Poster session 2 (Tuesday) |
| Katarzyna Mikszuta-Michalik | P2-111 | A Total Neutron Yield Constraint Implemented to the RNC Emissivity Reconstruction on ITER Tokamak | Poster session 2 (Tuesday) |
| SooHwan Park | P2-112 | Deployment of Multiple Shattered Pellet Injection System in KSTAR | Poster session 2 (Tuesday) |
| Yoshiteru Sakamoto | P2-113 | Progress of Plasma Scenario Modeling for JA DEMO | Poster session 2 (Tuesday) |
| Haewon Shin | P2-114 | Automatic Line Identification Algorithm of Impurity Spectra for Real-time Feedback in Fusion Plasmas | Poster session 2 (Tuesday) |
| Tamás Szepesi | P2-115 | Wide-angle Visible Video Diagnostics for JT-60SA utilizing EDICAM | Poster session 2 (Tuesday) |
| Hiroyuki Tobari | P2-116 | Achievement of DC 1 MV Insulation in High-voltage Power Supply for ITER Neutral Beam Test Facility | Poster session 2 (Tuesday) |
| Hiroyasu Utoh | P2-117 | Estimation of Magnetic Error Field with Alleviating Fabrication Tolerance of Large Superconducting Magnets on JA DEMO reactor | Poster session 2 (Tuesday) |
| Paul van Eeten | P2-118 | Organizing Wendelstein 7-X Device Operation | Poster session 2 (Tuesday) |
| Ting Wu | P2-119 | Effect of RMP on Boundary Plasma Turbulence and Transport on J-TEXT Tokamak | Poster session 2 (Tuesday) |
| Zhensheng Dai | P2-120 | Propagation and Supression of Tent-induced Perturbation in ICF Implosion | Poster session 2 (Tuesday) |
| Zhibing He | P2-121 | Gradient Nanoporous Gold: a Potential Inertial Confinement Fusion Hohlraum Wall Material | Poster session 2 (Tuesday) |
| Yansong Liu | P2-122 | Progress on Fabrication of High Density Carbon Capsule for ICF Target in LFRC | Poster session 2 (Tuesday) |
| Zhenyuan Xu | P2-123 | Research on the Airflow Distribution in the Laser Beam Transport Tube of the ICF Target Area | Poster session 2 (Tuesday) |
| Hong Yang | P2-124 | Numerical Research on Forming a Uniform Ice Fuel Layer in a Cryogenic Capsule | Poster session 2 (Tuesday) |
| Luka Snoj | P2-125 | Analysis of Irradiation Experiments with Activated Water Radiation Source at the JSI TRIGA Research Reactor | Poster session 2 (Tuesday) |
| Milan Stefanik | P2-126 | The p(20)+Be Reaction as a Source of Fusion Relevant Neutrons | Poster session 2 (Tuesday) |
| Jan Stepanek | P2-127 | Parametric Study of S-CO2 Cycles for the DEMO Fusion Reactor | Poster session 2 (Tuesday) |
| Jing Zhao | P2-128 | Minor Actinides Transmutation in a Molten Salt Blanket in the Fusion-Fission Hybrid Reactor Core | Poster session 2 (Tuesday) |
| Andrej Žohar | P2-129 | Analysis of Water Activation in Fusion and Fission Nuclear Facilities | Poster session 2 (Tuesday) |
| Robert Skilton | P2-130 | Towards Autonomous Robotic Systems in Nuclear Fusion Plant | Poster session 2 (Tuesday) |
| Michiko Ahn Furudate | P3-001 | Master Equation Study of HT Production in Tritium Breeding Blanket Purge Gas Flow | Poster session 3 (Thursday) |
| George Ana | P3-002 | Construction and Inactive Commissioning of a High throughput Micro-channel Reactor for Tritiated (Heavy) Water Production | Poster session 3 (Thursday) |
| Sergey Ananyev | P3-003 | Development of the DEMO-FNS Hybrid Facility Fuel System Concept and DT-fueling Systems | Poster session 3 (Thursday) |
| CHANGE | P3-004 | Moved to Poster session 2. (P2-053) | Poster session 3 (Thursday) |
| Katharina Battes | P3-005 | HgLab Karlsruhe – An Infrastructure Facility to support the Development of DEMO Vacuum Pumps with Mercury as Working Fluid | Poster session 3 (Thursday) |
| Domenico Valerio | P3-006 | Design of the EU DEMO Tritium Extraction System based on Permeation Against Vacuum technology | Poster session 3 (Thursday) |
| Ciprian Bucur | P3-007 | Investigations Concerning the Influence of the Catalyst / Package Ratio and the Catalyst Distribution on the Separation Performances of a LPCE Process | Poster session 3 (Thursday) |
| Woo Jun Byeon | P3-008 | Estimation of Tritium Transport Parameters in an Advanced Reduced Activation Alloy | Poster session 3 (Thursday) |
| Cao Zhi | P3-009 | Study on Deuterium Permeation Through Pure Iron after Exposed to LiPb | Poster session 3 (Thursday) |
| Zhibin Chen | P3-010 | Tritium Inventory Analysis for Compact Volumetric Neutron Source (CVNS) by using Tritium Analysis Program for Fusion System (TAS) | Poster session 3 (Thursday) |
| Yuki Edao | P3-011 | Evaluation of Thermal Profile in Catalytic Reactor by Exothermic Hydrocarbon Feed into Detritiation System | Poster session 3 (Thursday) |
| Luca Farina | P3-012 | Testing of Ceramic Porous Membranes for Separation of Plasma Enhancement Gases | Poster session 3 (Thursday) |
| Antonio Frattolillo | P3-013 | Work in Progress on a Novel Approach for Core Fuelling of DEMO by Injection of High-Speed Pellets from the High-Field Side | Poster session 3 (Thursday) |
| Stefan Hanke | P3-014 | Progress of the R&D Programme to Develop a Metal Foil Pump for DEMO | Poster session 3 (Thursday) |
| Norihiro Ikemoto | P3-015 | Hydrogen Storage System for Hydrogen Isotope Separation using Gas Chromatograph | Poster session 3 (Thursday) |
| Marco Incelli | P3-016 | Experimental Results of a Medium-Scale Pd-Ag Permeator for the Tritium Extraction and Removal System | Poster session 3 (Thursday) |
| Xiaomei Ji | P3-017 | Development of Low Specific Activity Analyzer with Proportional Counter | Poster session 3 (Thursday) |
| Woochan Jung | P3-018 | A Study on the Recovery Process of Hydrogen Isotopes | Poster session 3 (Thursday) |
| Pil-Kap Jung | P3-019 | Hydrogen Removal Efficiency using Storage-bed Circulation Process for Helium-3 Collection System | Poster session 3 (Thursday) |
| Kazunari Katayama | P3-020 | Influence of Lithium Mass Transfer on Tritium Behavior in Pebbles of Li2TiO3 with Excess Lithium | Poster session 3 (Thursday) |
| Min-Kyung Lee | P3-021 | Dynamic Modeling and Simulation of Pellet Injection System in ITER | Poster session 3 (Thursday) |
| Jae-Uk Lee | P3-022 | Simulation and Analysis of Fuel Storage System in Fusion Fuel Cycle Considering Off-normal Heat Loads | Poster session 3 (Thursday) |
| Peilong Li | P3-023 | Process Design of the Water Detritiation System for China Fusion Engineering Test Reactor | Poster session 3 (Thursday) |
| Christian Day | P3-024 | D/T Separation from He with Superpermeable Membranes: FCC V-alloys as New Membrane Materials | Poster session 3 (Thursday) |
| Jiangfeng Song | P3-025 | Effect of Ni and Ti Doping on Stability and Hydrogen Absorption Properties of Zr2Fe Alloy | Poster session 3 (Thursday) |
| Xiong Yifu | P3-026 | Rapid Purification of Hydrogen Isotopes by Helical Tubular Pd-8%Y Alloy Membrane | Poster session 3 (Thursday) |
| Wei Mao | P3-027 | Density-functional Calculations of Hydrogen Diffusion in Rutile TiO2 (110) | Poster session 3 (Thursday) |
| Kento Miyamae | P3-028 | Fuel Flow and Stock during Deuterium-Deuterium Start-up of Fusion Reactor | Poster session 3 (Thursday) |
| Yuri Natori | P3-029 | New Sphere Granulation and Sintering Method of Tritium Breeding Solid-ceramics | Poster session 3 (Thursday) |
| Alina Elena Niculescu | P3-030 | Development of Specific Software for Hydrogen Isotopes Separation by Cryogenic Distillation of ICSI Pilot Plant | Poster session 3 (Thursday) |
| Yuji Nobuta | P3-031 | Hydrogen Isotope Exchange in Tungsten during Baking in Hydrogen Isotope Atmosphere | Poster session 3 (Thursday) |
| Leonardo Noschese | P3-032 | Tritium Permeation Modeling in DEMO WCLL Cooling System | Poster session 3 (Thursday) |
| Gheorghe Popescu | P3-033 | Commissioning of the LPCE and Purification Systems as Front-end of the Experimental Pilot Plant for D-T Separation | Poster session 3 (Thursday) |
| Wenjing Pu | P3-034 | Effect of the Oxidation of Polysilane Scintillator on its Fluorescence Properties | Poster session 3 (Thursday) |
| Stefano Segantin | P3-035 | Optimization of Tritium Breeding ratio in ARC Reactor | Poster session 3 (Thursday) |
| Mikhail Subbotin | P3-036 | Status Tritium Laboratory of Complex TSP JSC “SRC RF TRINITI” and Tasks of Development Tritium Fuel Cycle under the Ignitor Project Requirements | Poster session 3 (Thursday) |
| Masahiro Tanaka | P3-037 | Initial Operation Results of Exhaust Detritiation System using a Polymer Membrane | Poster session 3 (Thursday) |
| Silvano Tosti | P3-038 | Membrane Gas-Liquid Contactor for Tritium Extraction from LiPb | Poster session 3 (Thursday) |
| Marco Utili | P3-039 | Characterisation of Tritium Extraction Unit from Liquid Pb-16Li alloy of WCLL-TBM in TRIEX-II facility | Poster session 3 (Thursday) |
| Nikos Vasileiadis | P3-040 | Uncertainty Analysis of the Computed Pump Throughputs of the ITER Divertor Gas Exhaust System | Poster session 3 (Thursday) |
| Axel von der Weth | P3-041 | Experimental Determination of Hydrogen Transport Parameters of 316L Steel in the Two-side Purge Permeation Setup Q-PETE | Poster session 3 (Thursday) |
| Tétény Baross | P3-042 | Diffusion Bonding Experiments of 1.4404 steels in a Gleeble 3800 Thermomechanical Simulator for Investigation of Non-destructive Inspection Methods | Poster session 3 (Thursday) |
| Paritosh Chaudhuri | P3-043 | Development, Characterization and R&D Activities on Lithium Ceramic Breeder Materials in India | Poster session 3 (Thursday) |
| Pablo Diaz-Rodriguez | P3-044 | Direct Observation of Hydrogen Permeation Through Grain Boundaries in Tungsten | Poster session 3 (Thursday) |
| Anna Golubeva | P3-045 | Deuterium Retention in Reduced Activation Ferritic/Martencitic Steels (RAFMS) at ELM-like Pulse Plasma Heat Loads | Poster session 3 (Thursday) |
| Sergej Gordeev | P3-046 | Validation study of turbulence models for thermal-hydraulic simulation of helium cooled DONES High flux test module | Poster session 3 (Thursday) |
| Dai Hamaguchi | P3-047 | Application of Friction Stir Processing on CuCrZr to Improve Material’s Property | Poster session 3 (Thursday) |
| Sho Hayakawa | P3-048 | Temperature Parallel Simulated Annealing with Self-generated Basins for Searching the Stable State of Microstructures in Materials | Poster session 3 (Thursday) |
| Takayuki Terai | P3-049 | Study of Extremely Low Nitrogen Concentration Lithium by Fe-5Ti alloy Hot Trap | Poster session 3 (Thursday) |
| Takanori Hirose | P3-050 | Evaluation of Fatigue Properties of Reduced Activation Ferritic/Martensitic Steel, F82H for Development of Design Criteria | Poster session 3 (Thursday) |
| Eiji Hoashi | P3-051 | Interaction between Surface Behavior and Inner Flow Pattern of Liquid Li Jet for Fusion Neutron Sources | Poster session 3 (Thursday) |
| Nils Holstein | P3-052 | Qualification Tests of an Electrochemically-Based H-Sensor for Application in Liquid Lithium of IFMIF-DONES | Poster session 3 (Thursday) |
| Haiyan Jiang | P3-053 | Experimental Study on Erosion-Corrosion Behavior of CuCrZr Weldment in Rotating Nanofluid | Poster session 3 (Thursday) |
| Jong-Il Kim | P3-054 | Effects of Sintering Conditions on the Microstucture of Li2TiO3 Tritium Breeding Materials | Poster session 3 (Thursday) |
| Hirotatsu Kishimoto | P3-055 | Microstructural Stability of Tungsten Coated CFC Plates aiming to Metal Wall Experiments at JT-60SA | Poster session 3 (Thursday) |
| Takuya Nagasaka | P3-056 | Effects of Specimen Thickness on Creep Properties of F82H Steel | Poster session 3 (Thursday) |
| Motoki Nakajima | P3-057 | Temperature Dependency of Corrosion Properties of F82H in High Temperature Water | Poster session 3 (Thursday) |
| Naofumi Nakazato | P3-058 | Simultaneous Effects of Applied Stress and Dissolved Oxygen on Surface Morphology of Steels for Cooling Systems of Blanket Module in Pressurized Water | Poster session 3 (Thursday) |
| Takashi Nozawa | P3-059 | Non-Contact Strain Evaluation for Miniature Tensile Specimens of Neutron-Irradiated F82H by Digital Image Correlation | Poster session 3 (Thursday) |
| Masayuki Ohta | P3-060 | Conceptual Design of Test Modules for DEMO Blanket, Diagnostic Device, and RI Production for A-FNS | Poster session 3 (Thursday) |
| Takafumi Okita | P3-061 | Verification of Accuracy of Contact-Probe Distance Meter for Lithium Target of Fusion Neutron Source | Poster session 3 (Thursday) |
| Taira Okita | P3-062 | Atomistic Simulations for the Absorption Process of an SIA Cluster via Self-climb in BCC-Fe | Poster session 3 (Thursday) |
| Mayank Rajput | P3-063 | Study of Nuclear Responses (transmutation, GPA, dpa) in Iron, Chromium and Tungsten for D-T Neutron Irradiation | Poster session 3 (Thursday) |
| Hideo Sakasegawa | P3-064 | Material Strength Standard of F82H for RCC-MRx | Poster session 3 (Thursday) |
| Sawoong Kim | P3-065 | Fabrication and Characterization of the 316L(N)-IG ESR Forging Block and Non-ESR Rolling Plate for the ITER Blanket Shield Block | Poster session 3 (Thursday) |
| Alexander Spitsyn | P3-066 | The Tests of the Rohacell 71HF — a Candidate Material for the SIC-2 Windows for the ITER HFS Reflectometry | Poster session 3 (Thursday) |
| Ildikó Szenthe | P3-067 | Irradiation of Optical Materials in BRR | Poster session 3 (Thursday) |
| Masayuki Tokitani | P3-068 | Leak Tight Joint Method for ODS-Cu/ODS-Cu by Application of the Advanced Brazing Technique | Poster session 3 (Thursday) |
| Alexander v. Müller | P3-069 | Tungsten Fibre-Reinforced Copper as an Advanced Heat Sink Material for Highly Heat Loaded Plasma-facing Components | Poster session 3 (Thursday) |
| Rafael Vila | P3-070 | Advances in Radiation Hardness Testing of Optical Windows for DEMO | Poster session 3 (Thursday) |
| Yoshiyuki Watanabe | P3-071 | Hydrogen Retention Behavior of Primary Precipitates in F82H Steel: Atomistic Calculation Based on the Density Functional Theory | Poster session 3 (Thursday) |
| Xiang Chen | P3-072 | Fracture Toughness Evaluation of Neutron Irradiated Eurofer97 Variants Using Miniature Bend Bars | Poster session 3 (Thursday) |
| Shota Yamazaki | P3-073 | Deuterium Retention in Plasma-Implanted W with Various Damage Distributions | Poster session 3 (Thursday) |
| Ju-Hyeon Yu | P3-074 | Mechanical Properties and Microstructure of Three Kinds of ITER-Grade Pure Tungsten with Different Manufacturing Conditions | Poster session 3 (Thursday) |
| Christoph Zauner | P3-075 | Thermal Interlayers for ITER – Development and Measurements | Poster session 3 (Thursday) |
| Yi Zhou | P3-076 | Application of Ti-doped MoS2 Low Friction /Anti Seize Coating for ITER first wall | Poster session 3 (Thursday) |
| Lorenzo Malerba | P3-077 | Modelling Ion Irradiation and Slip Localisation in Ferritic-Martensitic Steels: The Fusion-Fission Cross-Cutting M4F Project | Poster session 3 (Thursday) |
| Gaetano Aiello | P3-078 | FEM Analyses of the ITER EC H&CD Torus Diamond Window Unit Towards the Prototyping Activity | Poster session 3 (Thursday) |
| Sabine Schreck | P3-079 | Towards Large Area CVD Diamond Disks for Brewster-Angle Windows | Poster session 3 (Thursday) |
| Salvatore Almaviva | P3-080 | LIBS Measurements Inside the FTU Vessel Mock-up by using a Robotic Arm | Poster session 3 (Thursday) |
| Gianluca Barone | P3-081 | Preliminary Analysis on the Thermal Shield of DTT | Poster session 3 (Thursday) |
| André Carls | P3-082 | Analyses and Design of the Wendelstein 7-X Port Bellows Protection | Poster session 3 (Thursday) |
| Andrea Colangeli | P3-083 | Neutronics Related Integration Studies of EU-DEMO Pellet Injection System | Poster session 3 (Thursday) |
| Joris Fellinger | P3-084 | Design of Endoscopes for Monitoring Water-cooled Divertor in W7-X | Poster session 3 (Thursday) |
| Namil Her | P3-085 | Progress on the Manufacturing of ITER Thermal Shield | Poster session 3 (Thursday) |
| Junyoung Hur | P3-086 | Studies on the Tee Extrusion Process of ITER Thermal Shield Manifold Pipes | Poster session 3 (Thursday) |
| Xudong Li | P3-087 | Analysis of the Magneto-Mechanical Coupled Vibration of the In-Vessel Structures of HL-2M Tokamak Considering Halo Current Effect | Poster session 3 (Thursday) |
| Changyang Li | P3-088 | Design and Implementation of a Mobile Parallel Robot for Assembling and Machining the CFETR Vacuum Vessel | Poster session 3 (Thursday) |
| Sumei Liu | P3-089 | Tolerance Analysis of Vacuum Vessel for Chinese Fusion Engineering Test Reactor | Poster session 3 (Thursday) |
| Zhi Chen | P3-090 | Evaluation of Shielding Ability of Using Boron Water as Coolant in CFETR Vacuum Vessel | Poster session 3 (Thursday) |
| Francesco Lunardon | P3-091 | MEST, a New Magnetic Energy Storage and Transfer System: Application Study to the European DEMO | Poster session 3 (Thursday) |
| Eliseo Visca | P3-092 | Fluid-dynamic Investigation of Water-Boron Flow in the Vacuum Vessel of DTT Facility | Poster session 3 (Thursday) |
| Hokyu Moon | P3-093 | Hydrostatic Pressure Test of the ITER Lower Port Stub Extension for Factory Acceptance | Poster session 3 (Thursday) |
| Erwu Niu | P3-094 | Progress on the Qualification of Key Process for ITER Correction Coils | Poster session 3 (Thursday) |
| P3-095 | withdrawn | Poster session 3 (Thursday) | |
| Gergő I. Pokol | P3-096 | Design of the Ex-vessel Optical System of the ITER Core CXRS Diagnostic System | Poster session 3 (Thursday) |
| Rocco Mozzillo | P3-097 | Design of the European DEMO Vacuum Vessel Inboard Wall | Poster session 3 (Thursday) |
| Konstantin Senik | P3-098 | Numerical Simulation of the Temperature State of T-15MD Vacuum Vessel and In-vessel Components | Poster session 3 (Thursday) |
| Yusuke Shibama | P3-099 | Manufacturing and Welding Assembly of the Vacuum Vessel on JT-60SA | Poster session 3 (Thursday) |
| Pavel Shigin | P3-100 | RF Discharge Mirror Cleaning System Development for ITER Diagnostics | Poster session 3 (Thursday) |
| Peter Spaeh | P3-101 | Structural Pre-conceptual Design Studies for a EU DEMO Equatorial EC Port Plug and its Port Integration | Poster session 3 (Thursday) |
| Shayan Moradkhani | P3-102 | Condition Monitoring for a Robot Machine in the Assembly of Fusion Reactor Vacuum Vessel | Poster session 3 (Thursday) |
| Pietro Arena | P3-103 | Safety Analysis of the DONES Primary Heat Removal System | Poster session 3 (Thursday) |
| Thomas Bale | P3-104 | Exploring the Sdoption of Mobile Augmented Reality for Assistance in Fusion Plant Repair and Maintenance | Poster session 3 (Thursday) |
| Xiaoman Cheng | P3-105 | Primary Heat Transfer System Design of the WCCB Blanket for Multiple Operation Modes of CFETR | Poster session 3 (Thursday) |
| Sergio Ciattaglia | P3-106 | EU DEMO Plant and Building Layout Criteria | Poster session 3 (Thursday) |
| Lukasz Ciupinski | P3-107 | Design and Verification of a Non-self-supported Cryostat for the DEMO Tokamak | Poster session 3 (Thursday) |
| Cristiano Ciurluini | P3-108 | Thermal-hydraulic Modeling and Analysis of the Water Cooling System for the ITER Test Blanket Module | Poster session 3 (Thursday) |
| Matti Coleman | P3-109 | High-speed Generation of Neutronics-ready CAD Models for DEMO Design | Poster session 3 (Thursday) |
| Aljaz Cufar | P3-110 | Shielding Concept and Neutronic Assessment of the DEMO Lower Remote Handling and Pumping Ports | Poster session 3 (Thursday) |
| Manuela Frisoni | P3-111 | Nuclear Assessment of the IFMIF-DONES Lithium Target System | Poster session 3 (Thursday) |
| Curt Gliss | P3-112 | Integration of DEMO Radioactive Fluids Piping into the Tokamak Building | Poster session 3 (Thursday) |
| Jiangtao Jia | P3-113 | Comparative Neutronics Analysis of the European HCPB DEMO using SuperMC | Poster session 3 (Thursday) |
| Anikó Lilla Hegedűs | P3-114 | Analysis of Various Fusion Power Plant Turbine Cycles | Poster session 3 (Thursday) |
| Bong Guen Hong | P3-115 | Impact of Neutronic Constraints on Design and Performance of a Tokamak Fusion Reactor | Poster session 3 (Thursday) |
| Seokho Kim | P3-116 | Maximum Allowable Fluid Velocity and Concern on Piping Stability of ITER Tokamak Cooling Water System | Poster session 3 (Thursday) |
| Hyun Wook Kim | P3-117 | Design Updates of the Korean Fusion Demonstration Reactor Superconducting Toroidal Field Magnet System | Poster session 3 (Thursday) |
| Keeman Kim | P3-118 | Thermo-hydraulic Analysis of the K-DMEO CS Conductor Depending on the Design Change | Poster session 3 (Thursday) |
| Monika Lewandowska | P3-119 | Design and Analysis of the Secondary Circuit of the DEMO Fusion Power Plant for the HCPB BB Option without the Energy Storage System and with the Auxiliary Boiler | Poster session 3 (Thursday) |
| Guoqiang Li | P3-120 | Optimization of CFETR Physics Design to Meet the Engineering Feasibility | Poster session 3 (Thursday) |
| Emanuela Martelli | P3-121 | Investigation of Heat Transfer in a Steam Generator Bayonet Tube for the Development of PbLi Technology for EU DEMO Fusion Reactor | Poster session 3 (Thursday) |
| Jin Hun Park | P3-122 | Statistical Analysis of Tritium Breeding Ratio Deviations in the DEMO due to Nuclear Data Uncertainties | Poster session 3 (Thursday) |
| Piyush Prajapati | P3-123 | Design and Comparison Study of Steam Generator Concepts and Power Generation Cycles for Fusion Reactors | Poster session 3 (Thursday) |
| Alexander Rydzy | P3-124 | The DTT Secondary Cooling Water Systems | Poster session 3 (Thursday) |
| Arkady Serikov | P3-125 | Complete Neutronic Analysis for the Edge Charge Exchange Recombination Spectroscopy in Equatorial Port of ITER | Poster session 3 (Thursday) |
| Iuliana Stefan | P3-126 | Overview about Cryogenic Distillation Control and Safety Approach for Isotopes Separation Facility (ISF) | Poster session 3 (Thursday) |
| Andrea Tarallo | P3-127 | Advancements in CAD Implementation of EU-DEMO Water Cooled Lithium Lead Breeding Blanket Primary Heat Transfer Systems | Poster session 3 (Thursday) |
| Shuai Wang | P3-128 | Preliminary Efficiency Analysis of Thermal-electric Conversion System for China Fusion Engineering Test Reactor with Helium Cooled Solid Breeder Blanket | Poster session 3 (Thursday) |
| Kaiyun Chen | P3-129 | Progress on Design and R&D of ITER Radial X-ray Camera | Poster session 3 (Thursday) |
| Shuangbao Shu | P3-130 | An Intelligent Controller Design Based on the Neuroendocrine Algorithm for Plasma Density Control System on Tokamak Devices | Poster session 3 (Thursday) |
| András Zsákai | P3-131 | Systems Engineering Challenges of IFMIF-DONES | Poster session 3 (Thursday) |
| Zhizhen Liu | P3-132 | Status of R&D on the Tritium Technology for Fusion Tritium Plant at CIAE | Poster session 3 (Thursday) |
| Ralf Schroeder | P3-133 | Local Safety System of the Neutral Beam Injection for W7-X | Poster session 3 (Thursday) |
| Iuliia Ipatova | P3-134 | Nanoscale Structure Damage in Irradiated W-Ta Alloys for Nuclear Fusion Reactors | Poster session 3 (Thursday) |
| Elena Nunnenmann | P3-135 | Verification and Validation of the GEANT4 Monte Carlo Code Toolkit for DEMO Neutronics Applications | Poster session 3 (Thursday) |